![Kaj Luukko](/img/default-banner.jpg)
- 230
- 223 608
Kaj Luukko
Finland
Приєднався 8 кві 2007
A little bit of everything, some nest cam videos, high voltage stuff like Tesla-coils, and so on.
Vähän kaikkea ja jotain siltä väliltä.
Vähän kaikkea ja jotain siltä väliltä.
Poikanen kuorutuu - A chick hatches
25.5.2024
Yksi poikanen kuoriutuu
ponttokamera.blogspot.com/2024/05/nelja-poikasta-kuoriutuu.html
Yksi poikanen kuoriutuu
ponttokamera.blogspot.com/2024/05/nelja-poikasta-kuoriutuu.html
Переглядів: 129
Відео
Kuoriutuminen - Hatching
Переглядів 242Місяць тому
25.5.2024 ponttokamera.blogspot.com/2024/05/nelja-poikasta-kuoriutuu.html
Tintti suuttui oravalle - The bird got angry at the squirrel
Переглядів 3,9 тис.Місяць тому
Tintti suuttui. Ulkomakerasta ei näkynyt mitään joten ilmeisesti orava kolisteli talon katolla ja se kuullosta uhkaavalta. Muuten haudonta jatkuu normaalisti. The bird got angry. Nothing could be seen from the outside camera, so apparently a squirrel was making noise on the roof, which sounded threatening. Otherwise, the incubation continues as usual. ponttokamera.blogspot.com/2024/05/tintti-su...
Roihuvuoren kirsikkapuut - 16.5.2024
Переглядів 178Місяць тому
Roihuvuoren kirsikkapuiden kukintaa toukokuisena iltana 2024. Ajatus oli alun perin lennellä lähempänä puita, jopa niiden välissä, mutta liikaa ihmisiä paikalla, jotta sen olisi voinut tehdä. Hienolta näyttävät kauempaakin katsottuna. vihreatsylit.fi/kirsikkapuisto/
Haudonta alkoi. Incubating started.
Переглядів 100Місяць тому
14.5.2024 Haudonta näyttää vihdoin viimein alkaneen, kuusi päivää muninnan lopettamisen jälkeen. Incubation finally seems to have begun, six days after the end of egg-laying. ponttokamera.blogspot.com/2024/05/haudonta-alkoi.html
Tappelu - Fight
Переглядів 1,3 тис.Місяць тому
13.5.2024 Tappelu - Fight ponttokamera.blogspot.com/2024/05/taas-tapellaan.html It appeared that another great tit began building a nest in this box. It brought in moss typically used for lining the nest floor. Then the rightful owner of the nest arrived, and a fight broke out. Both emerged unscathed, and the nest likely didn't sustain serious damage either.
Kirjosieppo - European pied flycathcer
Переглядів 81Місяць тому
5.5.2024 Kirjosieppo talitiaisen pesässä The pied flycatcher in the nest of a great tit.
Tintti jahtaa kimalaista.
Переглядів 688Місяць тому
3.5.2024 The great tit is trying to get the bumblebee out of the nesting box. ponttokamera.blogspot.com/2024/05/kimalaisia-ja-toinen-muna.html
Kirjosieppo - Pied Flycatcher
Переглядів 112Місяць тому
2.5.2024 Kirjosieppo käy taas talitiaisen pesässä. The European pied flycatcher visits the nest of a great tit again.
20240501 Kimalainen - Bumble-bee
Переглядів 2602 місяці тому
ponttokamera.blogspot.com/2024/05/pesan-rakentelua-ja-kimalaisia.html
20240501 Rakentelua ja kimalainen
Переглядів 382 місяці тому
Kimalainen kävi pelästyttämässä tintin. The bee scared the bird. ponttokamera.blogspot.com/2024/05/pesan-rakentelua-ja-kimalaisia.html
20240430 Tappelu. Serious fight between great tit and pied flycatcher
Переглядів 3222 місяці тому
Kirjosieppo joutui tappeluun talitiaisen kanssa. The pied flycatcher invaded the great tit's nest box and got into a serious fight. ponttokamera.blogspot.com/2024/04/karmea-tappelu.html
20240430 Tappelu! Fight between birds!
Переглядів 5732 місяці тому
20240430 Tappelu! Fight between birds!
Staccato Controller for VTTC of Arduino Nano
Переглядів 1935 місяців тому
Staccato Controller for VTTC of Arduino Nano
20230609 Kameran päälle on hyvä laskeutua
Переглядів 93Рік тому
20230609 Kameran päälle on hyvä laskeutua
20230601 Siipien treenausta ja kurkistuksia aukosta ulos
Переглядів 94Рік тому
20230601 Siipien treenausta ja kurkistuksia aukosta ulos
20230529 Tikka ja normaalia päivän touhua
Переглядів 276Рік тому
20230529 Tikka ja normaalia päivän touhua
20230525 Poikaset kasvavat päivä päivältä
Переглядів 227Рік тому
20230525 Poikaset kasvavat päivä päivältä
heräs kyllä monta kysymystä. mihin tuolla käytetään noita kemikaaleja kuten ammoniakkia ja mitä muita nyt sielä huoneessa oli.. toinen ois ollu kiva nähdä vielä maanalaiset tilat.. veden ottamo.. sähkötilat
Ammoniakkia käytetään kattiilaveden pH:n säätöön, hydratsiinia hapen poistoon. Vedenkäsitetlyssä tarvitaan vielä rikkihappoa ja lipeää ioninvaihtimen elvytykseen. Automaatiotilasta tuossa oli pätkä. Sähkötila ei päältä päin kovin paljon siitä eroa. Vedenottamo jäi tosiaan välistä. Normaalistihan yhteistuotantolaitoksessa ei tarvita merivettä lainkaan, koska sekä laudutus- että hukkalämmöt käytetään kaukolämmöksi.
Ois tuolla varmaan silti vielä paljon nähtävää 🙂🙂
@@Feenix81 Oishan siellä. Minulla on enemmän videota kyllä, ehkä joskus julkaisen. Tuostakin tuli jo noin pitkä, piti vähän rajoittaa.
Sieltähän niitä uusia tinttejä tulee, ONNEA❤❤❤
Mielenkiintoinen 👍kiitos kuvaajalle😊
Hyvin asennetut kamerat pesällä 👍
Jännää hätistelyääntä
日本の桜。 日本の桜は4月に満開になります。 そちらでは、今満開なのですね。 遠い地で今、桜が見れてとても嬉しいです。 ありがとうございます。
コメントありがとうございます!動画を気に入っていただけて嬉しいです。ヘルシンキでは4月にはまだ雪が残っていることが多いですが、5月には桜が綺麗に咲きます。この美しさを遠く日本で共有できることを嬉しく思います。(ChatGPT がこのテキストを正しく翻訳していれば幸いです)
Ei se tinttikään halua turhaan alkaa ison kimalaisen kanssa tappeleen.
Ei näköjään. Aiempina vuosina olen kyllä nähnyt emon nappaavan ampiaisia nokkaansa ja vieneen ne ulos, mutta ehkä kimalainen koetaan vaarallisemmaksi. Tai sitten lintuyksilöissä on eroja, mene ja tiedä.
@@ponttokamera Kimalainen on aika pörheä ja näyttää isommata mitä onkaan. Tuo taisi olla kuningatar etsimässä uutta pesää.
@@jp4361 Voi hyvin olla. En ole perehtynyt kimalaiset pesintään. Missä ja miten ne pesivät?
@@ponttokamera Kannon ja puun koloissa, ilmeisesti eniten maassa. Minulla ilmestyy välillä kimalaisia hirsiseinän koloista, kun etsivät pesäpaikkoja.
In your wire feeder what type of Groove Bearing Pulley did you use? Are the STL files available for your wire guide?
Just some bearings I found on Amazon with the search terms "V Groove Bearing. There are no STL files available, as I did not use a 3D printer to make any part.
Who won: the owner or the guest?
The owner won.
あーーー、危なかった💦 ハチが出てくれて良かった
コメントありがとうございます!本当にそうですね。戻ってこないことを願っています。
Pönttö näyttäisi olevan aurinkoisessa paikassa. Auringonvalo kohdistuu suoraan pönttöön ja lankeaa vielä lentoaukosta sisään. Kesähelteellä pöntössä tulee liian kuuma. Varjoinen paikka metsikössä ja puussa on kyllä parempi ja oikeastaan lintujen kannalta oikea. Mutta video on kiinnostava. Tällaista on mukava seurata aina välillä.
Mikä on liian kuuma? Tällä paikalla on ollut pönttö liki 50 vuotta ja se on ollut ylivoimaisesti pihapiirin suosituin. Talitiainen pesii sujuvasti kyllä missä tahansa, ei ole niin tarkka paikasta, mutta esim. kuusitiainen ei mielellään pihapiirissä pesi. Sellainenkin on kerran pihassa ollut, pöntössä, mikä oli lähempänä metsää. Viime vuonna tässäkin pöntössä kävi kuusitiainen tutkimassa: ponttokamera.blogspot.com/2023/04/kuusitiainen.html
This could make a great baseline for a DnB track.
Haha, yes, why not. Let me hear it if you compose one!
Can you send drawing of digrama
Thank you for your video and code. It works very well. There are a couple of mistakes on the schematic. The capacitor C1 should be 1000uf instead of 1uf, and you have the 7812 12 volt regulator shorted to ground on the Vin Nano pin. I addressed these before I built the circuit (I've been in electronics since 1974) and it worked first time around. I thought this may help someone else trying to build this project. Thanks again for all the info. Keep up the great works! Regards, Cliff
Oh no, what a mistake. I don't know what I was thinking when I drew the circuit diagram. Thank you a lot for noticing! Hopefully, no one has fried their regulator :) It was actually 1 mF, millifarads. For some reason, CircuitLab converted it to 1 mF, even though I wrote 1000 μF. I also corrected that with separate text in the diagram in the blog post. Should perhaps add a flag to the video, too. Good to hear that you got the circuit working. Apparently, the code worked fine as well? I was considering using an opto-isolator between the output and the triac when designing it. However, I tried without it, and it worked just fine. If you want it to be more safe, you can add the opto-isolator there.
Yes your code worked perfectly! Thanks again.
CNC a mini lathe to do this
That will work just fine!
Hi, can you share the schematics, firmware of the machine? Thank you!
What material are you using for light windows? Does it resist to woodpecker's attacks? Thank you!
The windows are made of opal acrylic. The woodpecker has never once pecked at them. It did try to rob the chicks last summer, but only through the opening. At that time, I made a simple barrier that I attached in front of the opening to keep the woodpecker away. It worked well, you can see it in this video: ua-cam.com/video/egfqfblI6Mo/v-deo.htmlsi=OanLsGCqP2gvkZFy
So the woodpecker is able to stick its head into the nest, despite the small diameter of the hole? This has unlocked a new trauma for me. I think I will apply this countermeasure immediately. Thank you! @@ponttokamera
@@matteorivolta6932 Yes, a woodpecker can steal a chick. Here is a video from 14 years ago. The image quality is poor due to the technology of the time, but it shows how the woodpecker steals a chick from the nest. Older chicks jump high out of the nest when they hear a noise, thinking that it's the parents bringing food, not realizing that it's actually a woodpecker. ua-cam.com/video/exkt5LmVNhA/v-deo.html Also, last summer the woodpecker tried many times. ua-cam.com/video/Jk3fF81fXNc/v-deo.htmlsi=oCdxQDjfGB-Oymr9 Once it almost succeeded in catching the parent. ua-cam.com/video/JkdtDyJ3RIs/v-deo.htmlsi=DMqRd33ShnZgVFZ_
I'd wished that you'd posted some info: C in pf. for example (tank circuit) and whether you're using a MOT and voltage doubler. Nice VTTC arcs but most folks enjoy sharing aspects of their hobby. Also decided to swap 811A's for 572B's looks like a good tough tube considering they're not terribly expensive and will attempt 4 KV or so with doubler and high enough grid discharge resistance to keep the duty cycle 15-20 % but will have to experiment here. I'm going to try an air variable capacitor in mineral oil paralleled to my 2 -625 pf tank caps may be interesting. Keep rockin' that coil!
she likes it :)
Great work. I followed along and built it but the code on your blog is incomplete. Any way you can post the final code. Thanks again.
Hello, and thank you for your interest for my project! You're right, there was an error in the code, the blogger had messed it up. I fixed it a couple of days ago, it should be fine now. Have you tested it with the corrected code? The one that is linked directly from the Arduino cloud.
Looks great, well done. As I need multi-layer coils with optimal offset for density, I'm looking to build something similar that can do half width offsets at the ends in a rectangular bobbin.
Woody Woodpecker :)
where did you buy the magnet wire? i want to make sure i by enofe for a 6in pvc pipe 24in long. 22awg wire
As far as I remember, I bought it from a local store here in Finland: www.starelec.fi/product_info.php?cPath=79_1137_2397&products_id=10878
how did you come up with the offset for each stand
The offset for each stand is the offset of one turn divided by the number of stands.
Staying home and doing such stuff 👍🏻🙂🙂❤️
I am surprised by the quality of your videos. Such great content. But your SEO score is very bad, which is not good. You should focus on this. I can help you if you are interested!
Can you share the schematic? Can you give information about the machine? especially about arduino setup
Second nesting?
What happened?
"20130609" am I right that it is 2013 / 06 / 09 - 10 years ago?
No, sorry, wrong year. Should be 2023.
good luck birds!
mom got scared I think
I think that too. It was dark in the box, mom did not see what's going on.
What is going on? Why is 2-3 died and one more chick behaves strange, looks like it is also dying.
I think because of the cold nights and not a lot of food?
Those three remaining chicks all seem to be in pretty good shape. Why one was acting strangely, I don't know. Right now all three are sleeping side by side again. I think they will leave the nest tomorrow.
@@sunngifuwetzel1197I agree.
@@sunngifuwetzel1197 The other by-default hypothesis is: they eat poisoned insects/caterpillars. If people process trees against insects.
Did he ever stop?
Didn't stop until I installed this cover. ua-cam.com/video/egfqfblI6Mo/v-deo.html
Did he want to eat them?
Kyllä halusi. Tai sitten halusi viedä niitä omille poikasilleen ruoaksi.
Tässä on video vuodelta 2005, jossa tikka vie yhden poikasen. ua-cam.com/video/exkt5LmVNhA/v-deo.html
Kivan iso pönttö
Minusta pönttöjen kokosuositukset ovat vähän ahtaanpuoleisia. Talitiaisen pöntön sisämitan suositus on 10-12 cm, tämä on 12,5 cm. Poikasia voi olla jopa 12 niin kyllä se 10 cm pönttö tosi ahtaaksi tulee kun poikaset ovat isoja.
Loistava idea tuo este!
Hyvä este! Tikka ihmeissään!
Has the woodpecker arrived since you installed this protection? It is interesting to see the woodpecker's behavior as well :)
It has for a few times. Just find some newer videos. Now it seems to have given up, as it hasn't visited for a couple of days.
@@ponttokamera Oh, yea, I saw that video with the woodpecker says "Aaaa? WTF". Thank you for this whole story!
Tosi hieno tikkasuoja👌
Ainakin se toimii!
brave parents! lately I saw woodpecker attacked blue tit box, both parents defended but not so effective as here so I helped them a little.
Isn't it amazing how small birds defend their offspring against much larger woodpeckers?
@@ponttokamera yes, such brave little guys.
Aika turhauttavaa on laittaa talitinteille pesäpönttöjä, kun joka kevät kirjosiepot valtaavat ne kuitenkin. ☹️
Kyllä sitäkin tapahtuu, mutta itse en ole omissa pöntöissäni nähnyt. Yksi konsti voisi olla säästää muutama pönttö sieppoja varten ja laittaa ne paikoilleen vasta kun ovat saapuneet maahan. Silloin saavat tyhjän pöntön itselleen. Tuo on varmasti siepon näkökulmasta aika iso ongelma, kun monet kolot on jo varattuja kun tulevat muuttomatkaltaan.
@@ponttokamera Kyllä minun pöntöissäni on jokavuotinen juttu, että kirjosiepot valtaa ne.
On kyllä pehmoisen näköinen pesä talitiaisella,kyllä siihen passaa munia
ok, the way you made it - is good (the best i have seen so far) - i will clone parts of concept for my project... would be interesting how you mount that Tube into the machine (in a quick way?)
Olá...pode me fornecer o projeto desta máquina de enrolar as bobinas??
I need to wind myself a coil with 11,750 turns of 0.19mm wire in order to fix a 70's Italian flip clock. Any tips as to whether I should use a pro winding machine like this or can it be done with a makeshift cordless drill setup (i.e. guide the wire by hand)? With that many turns and such a fine wire, I'm concerned about snapping the wire halfway.
bonjour et félicitation pour votre excellent travail le rêve pour les amateurs de Tesla.. cordialement Raymond.
Impressive!
Share your project
Lovely song, great performance